This pH/temperature/TDS 3-in-1 water quality controller has pH&TEMP&TDS tri display and pH control which can simultaneously measure and display pH/temperature value and total dissolved solids(TDS). It has BNC electrode(pH) and 1 output power socket. The pH electrode is removable and can be replaced at any time. With relay output power socket, you can plug your own 110V/220V equipment, such as air outlet stone, oxygen pumps, carbon dioxide regulators, solenoid valves and other pH control devices. Simply set the desired Hi/Low pH value in the controller. If the pH value currently measured is lower than the set value, it will open the device. If the measured value is higher than the set value, it will close the device. Suitable for aquarium pool, soil-free growing, laboratory, and environment water.
Features:
Widely used to test the pH / Temperature / TDS (Total Dissolved Solids) of water.
With relay output power socket, you can control the pH value according to your requirements.
You can replace the fuse easily and fast with external replacement. Detachable and replaceable pH electrode.
With power plug for air outlet stone, oxygen pumps, carbon dioxide regulators, solenoid valves and other pH control devices.
Test the TDS with both PPT and PPM units at will.
Easy calibration of pH/TDS with just a mini-screwdriver and automatic temperature compensation.
Clear LCD with backlight, 3 results displayed simultaneously. Easy to use and provide instant display of results.
Test temperature in celsius / Fahrenheit (switchable units) and can online monitor and control pH for a long time.
Apply in water sources, soil-free growing, aquarium, hydroponics, laboratory, spas, environment water, swimming pools, water purification systems, etc.
Specifications:
Color: Blue
Material: ABS Plastic
Type: pH/TEMP&TDS-2826
Plug Type: EU / US (Optional)
Input Voltage: 230~240V (EU) / 110~120V (US)
Range: pH: 0.00 ~ 14.00pH
? ? ? ? ? ? TDS: 0 ~ 1999PPM (0 ~ 19.99PPT)
? ? ? ? ? ? Temperature: -50 celsius ~ 70 celsius (-58 Fahrenheit ~ 158 Fahrenheit )
Resolution: pH: 0.01pH?
? ? ? ? ? ? ? ? ? ?TDS: 1PPM (0.01PPT)
? ? ? ? ? ? ? ? ? ?Temperature:0.1 celsius (0.2 Fahrenheit )
Accuracy: pH: +/-0.1pH
? ? ? ? ? ? ? ? TDS: +/-2percent F.S
? ? ? ? ? ? ? ? Temperature: +/-1.0 celsius (+/-2 Fahrenheit )? ?
Temperature Compensation: 0 celsius ~ 50 celsius (32 Fahrenheit ~ 122 Fahrenheit )
Working Temperature: 0 celsius ~ 50 celsius (32 Fahrenheit ~ 122 Fahrenheit )?
Input Resistance: 1012 Ohm
Alarm Setting Range: pH 3.50pH~10.50pH?
Length of Sensor Line: 2m / 6.56ft
pH/TDS/TEMP Tester Size: Approx. 160 * 95 * 40mm / 6.3 * 3.7 * 1.6in (Excluding Electrode Connector)
Control Socket Size: Approx. 130 * 65 * 55mm / 5.1 * 2.6 * 2.2in (Including Fuse)
Item Weight: Approx. 786g / 27.7oz
Package Size: Approx. 32 * 20.5 * 7.6cm / 12.6 * 8.1 * 3.0in
Package Weight: Approx. 1000g / 35.3oz
Package List:
1 * 3 in 1 Water Quality Tester with TDS Electrode
1 * pH Electrode?
1 * Temperature Electrode
2 * Suction Cups
4 * Self-tapping Screws
1 * Mini Screwdriver
1 * User Manual
No-delivery refund
