6 In 1 New Wall Scanner Stud Finder Cable Wires Depth Tracker Wall Metal Detector Electronic LCD Backlit AC Wire Wood Finder

Good luck with your favorite purchases6 in 1 New Wall Scanner Stud Finder Cable Wires Depth Tracker Wall Metal Detector Electronic LCD Backlit AC Wire Wood Finder Features •1/2"Stud Scan Mode:Detects wood or metal studs up to 13mm deep

•1"Stud Scan Mode:Detects wood or metal studs up to 25mm deep

•1 1/2"Stud Scan Mode:Detects wood or metal studs up to 38mm deep

•Metal Mode:Detects metal up to 80mm for magnetic(60mm for non-magnetic)deep

•AC Mode:Detects live unshielded AC wires up to 51mm deep

•Metal Depth Indicator

•Green Backlight

•Low Voltage Indicator

•Battery Type:9V battery(6F22)(not included)

•Operating Current:<50ma

•Shutdown Current:<10UA

•Automatic Shutdown Time:3 minutes Detection Mode Selection Stud Mode In stud mode, there are 3 scan modes o choose for properly thick of thescanning surface: 1/2"Scan Mode can detect 1/2 in. (13mn) deep. 1"Scan Mode can detect 1 in. (25mm)deep. 1 1/2"Scan Mode can detect 1 1/2 in.(38mm) deep. If you don't know the depth of the detection, it is recommended to use 1/2"scan mode first. When 1/2"scan mode is not detected, use 1"or 1 1/2"scan mode instead.

Metal Mode: The detection of magnetic metal can be as deep as 3.2 in. (80mm) (diameter 15mm galvanized steel tube) It can detect non-magnetic metals up tc 2.4 in. (60mm) (diameter 13mm copper tube).

AC Mode: Detect unshielded AC live wire up to 2 in. (51mm) deep.