RCmall 4-Pack TS90MD 9g Micro All-Metal Gear Digital Servo with 270 Degree Control Angle for RC Drones and Smart Cars

Product Description

RCmall 4-Pack TS90MD 9g Micro All-Metal Gear Digital Servo with 270-Degree Controllable Angle for RC Drones and Smart Cars

Specifications: Size: 22.4 x 12.5 x 22.8mm Storage Temperature Range: 30°C to 80°C Working Temperature Range: -25°C to 70°C Humidity Range: 65% ±10% Gear Type: Metal Bearings: None Speaker Gear Key: 20T, Diameter: 1.8mm, Height: 4.3mm Speaker Type: Plastic POM Case: Plastic (PBT) Connector wire: 250mm ±5mm Motor: Carbon brush motor Waterproof: No

Working voltage: 4.8V/6.0V No-load current: ≤40mA ≤40mA No-load speed: 0.11 sec/60°, 0.09 sec/60° Drive current: ≤200mA ≤300mA Maximum stall torque: 1.6kg/cm, 1.8kg/cm Run torque: 1.2kg/cm, 1.4kg/cm Stop current: Max 580mA, Max 800mA Command signal: Pulse amplitude correction Amplifier type: Digital controller Pulse amplitude range: 500-2500usc Mid position: 1500usc Deadband width: 5 usec Counterclockwise rotation (1000 - 2000 usec) Output: Red wire: Rating + Black wire: ,Wire - Brown, Signal S

Implementation: Four TS90MD9G Micro Digital RC Servo Set of 4

Note: Use standard PWM control signal, cycle time is 20ms, high level time is 0.5-2.5ms. Can park at 270° and 180° angles, and angle adjustment is also possible. 360° is continuous rotation, so angle and speed cannot be controlled. Angle control is possible at 180° and 270°. PWM500-2500 remote controls only allow half stroke.

Safety Warning

Not Applicable [TS90MD 9g Micro Digital Servo] This is a full metal gear digital servo. It is durable, stable, highly accurate, and responsive. [PWM Control] Use standard PWM control signal. The cycle time is 20ms, and the high-level time is 0.5-2.5ms. [Angle Controllable]—PWM 500-2500 provides 270 degrees, while PWM 1000-2000 provides 90 degrees. It can park at a 270-degree angle and is angle adjustable. [Specifications] Operating voltage: 4.8V-6V. Empty speed: 0.11 seconds/60°@4.8V; 0.09 seconds/60°@6V. Rotor locking torque: 2.2 kg-cm/6V; operating moment: 1.2 kg.cm@4.8V, 1.4 kg.cm@6V. [Case Included] 4 x TS90MD 9g micro digital RC servos; 4 x parts sets.