Makita HP003GZ Cordless Impact Driver 40Vmax and Case Sold Drill, (Battery, Charger, Separately)

Overwhelming speed even for heavy-duty tasks. Comfortable even when driving long screws into CLT and LVL materials. Equipped with a "medium-speed mode," it quickly handles heavy-duty tasks such as driving long screws into CLT and LVL materials. Work efficiency is approximately 2.7 times higher when using medium-speed mode (compared to conventional Makita models, when driving long woodworking screws (φ10 x 320mm) into CLT cedar material, with BL4025 attached). Powerful with a maximum torque of 180 N·m. Maximum rotational speed is 2,400 min⁻¹ (in high-speed mode). Equipped with "AFT" to reduce wobbling. A sensor detects wobbling and "automatically stops the motor". 41-stage electronic clutch. Clutch adjustment is available in 41 stages for low speed, 30 stages for medium speed, and 25 stages for high speed. Fine-tune settings can be easily adjusted with the dial. DC 36V (40Vmax), slide-type Li-ion battery specification. Battery and charger sold separately. Maximum drilling capacity: concrete block 20mm, steel 20mm, wood 50mm, countersink 76mm. Screw tightening capacity: wood screw φ10 x 90mm. Chuck capacity: 1.5-13mm. Maximum torque: 180N・m. *Supplement to maximum torque, rigid body tightening torque: tightening torque when a load is instantaneously applied from full speed to a rigid body without springs, etc. Rotation speed: High speed 0-2,400, Medium speed 0-1,800, Low speed 0-650 [revolutions/minute] Workload per charge (approximate): Approximately 400 8mm carbide drill bits (with BL4025 attachment, brick depth 30mm) Dimensions: 197mm (length) x 86mm (width) x 277mm (height). Weight: 2.5kg (with BL4025 battery installed)