IsolBau Floor Paint Black – 12 kg
IsolBau Floor Paint is a silk-matte, abrasion-resistant, and water-based single-component dispersion membrane with high adhesion to the substrate.. Let's take a closer look at the colors, the hydrophobic Decorative-Insulating Layer, which is UV and weather resistant.
Suitable for indoor and outdoor use. The pure acrylic floor coating is durable, quick-drying, and resistant to foot traffic and chemicals.. Available in several RAL color variants.
• Very good adhesion
• Very good coverage
• For indoor and outdoor
• Quick-drying
• Tire and shock resistant
• Resistant to water, oil, grease, and chemicals
• Saltwater-resistant and de-icing salt-resistant
• Good penetration ability
• Universally applicable
• Easy to process
• Non-corrosive to metals
• Made in Germany
• Colors from different batches may show slight variations. The work should be carried out continuously and without interruption.. Only products from a single production batch should be used in an area.
The product has a lighter hue in its liquid state, which will achieve the correct color after complete drying.
Applicable to all construction surfaces such as concrete, cement, plaster, screed, steel, wood, and more. The coating for painting and sealing garages, halls, storage rooms, offices, basements, balconies, stairs, industrial floors, concrete fences, concrete elements, garden figures, balustrades, concrete tombstones, concrete swimming pools, garden ponds, paving stones, sidewalks, terraces, slabs, facades etc.
will be dyed.
Old paint, dirt, moss, and lichens should be removed with a high-pressure cleaner.. After washing the substrate, you must wait until it is completely dry.. Poorly adhering, oily, flaking parts should be removed and holes filled.
Rusted areas on metal cladding should be thoroughly cleaned and treated with a suitable anti-corrosion agent.. Priming the substrate with diluted paint - Paint with water in the ratio 1:2 dilute.
Stir the paint with a slow-speed mixer before starting to paint.. Apply the product with a roller, brush, or syringe. At least 2 coats will be applied (preferably 3) required.
Apply the next layer at a right angle to the previous layer. Colors from different production batches should not be applied to the same surface or to surfaces that are in contact with each other.
Work on a surface without interruption. This guarantees a uniform appearance without color differences. Do not apply before precipitation, in case of frost risk, at a relative humidity above 80%, and on strongly heated surfaces.
Do not apply paint to damp surfaces.
Clean tools with water immediately after use while they are still fresh. Dried-on material can only be removed mechanically.
Density | approx.. 1.3 kg/l
Processing | Brushing, Rolling, Spraying
Syringes | Airless
Nozzle | 0.021 – 0.026"
Spray pressure | 150 – 200 bar
Consumption | from 0.14 to 0.4 kg/m 2 depending on the surface
An additional coat may be required on strongly rough surfaces. The exact consumption can only be determined by a trial coat on the test area.
Number of layers | at least 2 (3 recommended)
Processing temperature | +5 ÷ +30 °C (Substrate and Surroundings)
Applying another layer | earliest after approx. 24 hours and after ensuring that the previous layer is completely dry.
Full curing | after approx.. 8 days
Usable no earlier than 8 days after applying the last coat.
Time specifications refer to normal temperature +23 °C and 50% relative humidity. Higher temperatures and higher humidity shorten, lower temperatures and higher humidity lengthen the specified times.
The product must be used according to the required technical knowledge and occupational safety regulations.
The properties are retained for 12 months in the unopened original packaging.. Protect from direct sunlight, hot springs, and frost.
Storage temperature from +5 °C to +30 °C.
EUH 208: contains 5-Chloro-2-methyl-4-isothiazolin-3-one and 2-Methyl-2H-isothiazol-3-one, may cause allergic reactions.
First Aid Measures: In case of contact with eyes, rinse thoroughly with water and consult a doctor. In case of contact with skin, remove clothing and wash skin with soap and water and apply a suitable cream.
If swallowed, rinse mouth immediately with water, do not induce vomiting. Then immediately see a specialist.
Occupational Health and Safety: Wear work clothes, safety glasses, and gloves. Do not eat, drink, or smoke while using the product.
the tools are only to be cleaned mechanically.
cleaning: Tools should be cleaned immediately after use with thinner. After drying, can
No-delivery refund
